Monday, June 27, 2011

Another engine, part II


Got called into work on Friday, so the engine-ectomy did not take place until Sunday. After watching the F1 race at Valencia, Spain, on FOX TV (Vettel is a truly amazing driver, is he not?), I headed in to Duluth. Mark provided me with a key to the shop, but Phil was there working on a project so helped me get started.

Shortly after Phil left, Dark Dan wandered in the door. He had been doing laundry across the street. Since his evening was without structure, he offered to give me a hand. Together we worked on making all of the disconnections, and about six hours after I started, the engine and trans were on the floor.

The biggest problem was the cable from the shifter to the automatic transmission. A call to Mark gave me the correct procedure and the cable was easily removed.

Now to remove the engine from the A/T and determine if the timing chain needs replacement. At 240,000 miles, it probably does. Then it can be dropped onto a manual transmission for installation in the race car this weekend.

Dave Steen has come up with a couple more drivers for the team, Jim Seubert and Rick Moe, some friends from the Porsche Club who have experience racing at B.I.R. That makes six.

Thursday, June 23, 2011

Another car, another engine


Since none of the three 2.1-liter Saab engine blocks that I have for the race car are perfect, Mark is not too keen on building a race engine our of any of them. He proposed another possibility. His son, Phil, bought a 1993 900S for very cheap a year or more ago because it needed an automatic transmission. Phil intended to find a suitable slushbox to drop in so he could sell the car, but good automatic transmissions for the 900 are not easy to locate. I made Phil an offer on the car, and FHR now has another 2.1-liter engine available.

Got the car started with a battery boost and drove it into the shop. Planned to do a compression check and leak-down test, but the compression check came back with about 120 psi on all four cylinders. That's pretty damn good for an engine with 240,000 miles, especially one that hasn't been run in over a year and had not gotten up to operating temp yet.

The plan is to pull the engine & gearbox on this car on Friday night at SVS in Duluth. Because of the high mileage, Mark wants to replace the timing chain and guides, but I am all for just dropping it onto a 5-speed gearbox and go racing with it as is.

Monday, June 20, 2011

More drivers!

Dave Steen and David Steen, Jr., have signed on as drivers for the July 16th race at BIR. They will also provide sponsorship from Dave's firm, Teleplus Consulting.

And it looks like Herm Johnson, former SCCA Super Vee Champion (1976), USAC Super Vee Champ (1977), ChampCar driver (1979-85) and Indianapolis 500 competitor (who is listed in Wikipedia), will be our fourth driver. "From ChampCar to ChumpCar"... I can see a News Release coming.

Since this will be a 14 hour race, there is still room for a driver or two.

I spent part of the weekend working my night job, but did manage to dig through some of my spares to load into bins for the race. I've seen other teams spend hours to find parts after a failure, and would prefer that our team is prepared for most anything. I have three or four plastic bins, and two are already full.

Mark Strohm said that he wanted to get his Toyota Corolla ITB car out for the SCCA regional at B.I.R. in a couple of weeks, but he would need to get a waiver since it's been a few years since he raced it. I suggested that he should enter it instead in the Exception Class (EC) at the ChumpCar race a week later. He could get a season worth of seat time, and so could three other drivers. He is considering it.

Wednesday, June 15, 2011

Engine work progress

Took the head and crankshaft from the backup engine to Midwest Engine Rebuilders in Duluth Tuesday for some service. The prognosis is good on both counts. Bobby says the crank may need a little cleanup but that should be all. The head will likely get by with shaving the surface rather than a complete valve job. Good news since that means less expense.

The progress on the race engine from last season? None. Mark is pessimistic about cleaning up the rust in the cylinders, and whether the crank may have acquired some rust as well. But he has not done any further disassembly to verify anything. He is many engine re-builds behind at the shop, and since the FHR engine is not a paying gig, it has low priority.

QUICK ENGINE UP-DATE (6/16/11) Mark decided he doesn't liKe the rust in the cylinders so wanted to re-bore with oversized pistons and rings. That's not in the budget so I brought him another B212 engine block. Cleaned it up and painted it blue before I dropped it off at his shop.

Since “The Good - The Bad - The Ugly 14 Hours of Brainerd” runs from 9am to 11pm, lighting will be required. I have been pondering whether to re-install the stock headlights, or to go with a pair of driving lights and a pair of fog lights. The front bumper we are using is just the stock, very heavy aluminum bar with the plastic cover and styrofoam guts removed. It should be easy to mount lights to the bar via the stock mounting holes in that bumper.

Another driver inquiry, this from a dirt track guy in Southern Minnesota. He has to clear it with his other half, but should have an answer in a few days.

Thursday, May 26, 2011

Out of time for the June BIR race


Every race car needs a parts donor... or two... or three. Total cost to buy these four Saab 900s? $800!

With less than ten days until the June race at Brainerd Int'l Raceway, it has become apparent that the race car will not be ready. The entry has been transferred to the July 16th race at BIR, a 14-hour enduro. As the Volkswagen ad said: Drivers Wanted.


In the meantime, I continue to work on rebuilding the spare engine in my garage as time ... and money ... permit. Disassembly is down to the short block. I'll check the main and rod bearings, but will probably not remove the pistons. The cost for parts and a valve job run about $500. Pistons and rings are expensive for the 2.1L engine due to the rarity of that powerplant. I did buy some parts at RockAuto on closeout, rod bearings and a timing chain and some brake parts, so they were cheaper than wholesale.

As long as the engine block was stripped, I decided to paint it. But instead of the factory red color, I decided to use a light blue. I bought a spray can of engine paint at Central Sales, the local surplus store, for $2.99. The color was "Chrysler Blue". I shook it up for some extra time since it had probably been on the shelf for several years. When it started to come out the coverage was poor, as if there wasn't a lot of pigment in the spray. Suddenly there was more color to the spray and the nozzle quickly clogged up. I removed it from the can and cleared it with pressurized air. but it quickly clogged up again. It wasn't long before the spray was spitting something that looked like varnish beads, so I quit painting.

Picked up a can of Dupli-Color Engine Enamel at the local O'Reilly store for $5.49. The hue was Pontiac Blue, but the shade was nearly identical to the Chrysler Blue. I attempted to scrape off some of the previous paint job, then proceeded with the new paint. What a difference! The paint covered nicely, no clogs, and dried quickly. The finished product looks pretty darn good.

Sometimes it doesn't pay to go cheap.

Monday, May 16, 2011

Rusty cylinders


The top two photos show some of the wear from last summer's racing at Iowa Speedway. The bearings from one inner axle tripod are gone, which must have made for some serious vibration for the later drivers. In addition, the rubber bushing for the upper a-arm is pretty trashed.



Tore the race engine apart yesterday. The cylinders do not look very good, which you can see in the other two photos. When the engine overheated at Iowa last summer, it apparently warped the head because water was getting into the cylinders. We knew that at the time. However, I was not able to get to the engine tear down until lately, so rust was able to form in all four cylinders over the winter. That rust extends to the valves in the head. The head gasket held up, so the head itself must have warped due to the heat. Don't know yet if it is salvageable. I'm hoping that it can be cleaned up with a little honing.

I did not disassemble the gearbox, but several gear teeth came out when the lube was drained. We know that 3rd gear went away early in the Iowa race, so that will need to be replaced.

Did some cleanup in the engine compartment of the racer on Sunday, so it isn't quite so gross. There was a lot of oily sand in most of the usual collecting places, and a bit of engine degreaser followed by a high pressure douche got rid of most of it. Followed up with several cans of brake cleaner to get much of the rest.

Also tried to do some work on the engine out of the parts car but did not have the correct size socket to remove the crankshaft pulley (27mm).

Looks like the right side engine mount is bad, but the one out of the parts car may suffice as a replacement.

Less than three weeks to race day and there is a lot of work to do.

Friday, May 6, 2011

Grime & slime, rust & crust



Finally got the drivetrain out of the parts donor today. Spring has been slow in arriving this year, so I have put off the final plucking of the engine/gearbox unit in my unheated garage until it warmed up a bit.

Rust and other corrosion were a serious problem, as were years of oil and other fluids dribbling throughout the engine compartment.



The donor car is back on its tires and has been rolled out of the garage. Mark Strohm stopped over to help remove the racer from the trailer and it has been rolled into the garage for a similar extraction. Hopefully it will take less time to remove as there is no rust nor slime to deal with.